Consumer unit repair in Swadlincote

Re-energize Electrical repairs a faulty consumer unit in Swadlincote and in Winshill villas, when a breaker opens, a lid will not close, or one circuit will not isolate.

Calls answered 24/7

  • Local to Swadlincote

Consumer unit repair price

After the failed breaker, lid or switch has been inspected, the repair figure is confirmed. Different faults are never given a single standing figure.

From £225

£225 for up to 1 breakers or RCDs to replace, then £69 per additional breakers or RCDs to replace.

Included

  • Finding whether an opening breaker is a bad device or a fault on its circuit.
  • Repairing a lid that will not close, latch or sit flat.
  • Changing the one switch that no longer isolates its circuit.
  • Checking the repaired circuit turns off and on before we finish.

Not included as standard

  • Taking out the whole consumer unit and fitting a new one.
  • A house rewire, or extra circuits the board does not already feed.
  • Anything to do with gas meters or gas appliances.

Ways to pay

  • Visa
  • Mastercard
  • American Express
  • Apple Pay
  • Google Pay
  • Klarna
  • Pay by bank
  • Lid repairs and breaker repairs are confirmed apart from one another.
  • If repair is not possible, removal of the unit waits until you have been told.
  • Domestic homes, shops and landlord lets can each be repaired, and the figure follows the fault found.
Illustration of Rob mounting a home EV charger on a brick wall by Re-energize Electrical

When a board needs repair

Plenty of consumer units only have one failed part. Repair is for that part, when the rest of the board can stay on the wall.

  • Breaker opening on its ownClosing the breaker only for it to open again points to the device or to that circuit. We find which, then repair the board so the circuit can remain on.
  • Lid refusing to shutA cover that catches, sits proud or will not latch leaves the devices poorly covered. We repair the lid so it closes properly on the unit.
  • Circuit no longer isolatingIf turning one switch off leaves that circuit live, the device has failed even when neighbouring circuits are fine. We repair that device alone.

What happens on the day

The visit follows the symptom, with tests done before any device comes off the board. We explain what the tests show.

  • Noting how it failsWe note whether the breaker opens straight away, the lid has never shut, or a named circuit stays live. The pattern sets the order of tests.
  • Tests with power controlledThe affected circuit is tested while the rest of the installation is kept safe. Parts stay in place until the failed one is clear.
  • Putting the part rightThe failed breaker, switch or lid is repaired or changed. We then check that the circuit isolates and that the cover closes fully.

How booking works

  1. Tell us about the job

    Tap Book Now and describe the work in the chat. Photos help.

  2. Get your price

    You see your price in the chat. A set price is paid at checkout; any other job is quoted first.

  3. Choose your visit

    Give your address and when you are free, and the visit is arranged.

Follow your job from booking to receipt

See when we're on our way, get your job report the moment we finish, and pay in seconds.

  • Track us on our way

    See us on the map with a live arrival time.

  • Your job report, same day

    See exactly what was done as soon as we finish.

  • Invoice and receipt in one place

    Pay online in seconds, and your receipt is always there when you need it.

Why choose Re-energize Electrical

Free quotes with no obligation, options explained in plain terms, and a work area left clean and tidy when the job is done.

  • Honest and reliable

    Honest pricing with no hidden costs

  • Our commitment

    Friendly, reliable, and respectful in your home

Photo of Rob EbbuttRob EbbuttElectrician
Reviews
51
Rating
5.0
Trading since
2026

Photos of our work

Three light pendant fitted over a dining area
Loft conversion room with new sockets beneath the roof windows
Newly decorated room with downlights and double sockets fitted
Garden room lit with outdoor festoon lighting at dusk
Chasing a new cable route into a stripped kitchen wall
Fitting a socket back box beside a window during renovation work

Consumer unit repair questions

Still have a question?

Can a consumer unit be repaired rather than replaced?

It can, where a breaker opens, a lid will not close, or one device no longer isolates its circuit. Where the whole unit has failed, we say so and stop.

What does a lid repair involve?

We check the cover, the latch and the devices it has to clear. Many lids can be made to shut without lifting the unit off the wall.

Do villa boards in Winshill come under this?

Yes. Georgian and Victorian villas in Winshill often keep a consumer unit that is worth repairing. Swadlincote boards are repaired on the same basis.

Will the whole board be swapped without warning?

No. Repair leaves every sound part where it is. A full change, if it is truly required, is explained before that work begins.

Does this include a rewire?

No. Mending the consumer unit leaves the house wiring as it is. A rewire or a run of new circuits is another job.

Book or ask a question

Calls answered 24/7